Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Problem in Configuring linux BSP for power processor

Status
Not open for further replies.
S

satyagandu

Junior Member level 1
Joined
Apr 28, 2007
Messages
15
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,369
hi,

I am preparing linux for power processor (MPC8260). for this
linux version -----2.4.24.
Boot loader ---- UBOOT.

first i configure the uBOOT by using make gw8260_config command.
I got an error when i gave MAKE.

error is /sh/bin :line 1: powerpc-linux-gcc : command not found .

please give me the solution and the further steps to follow.



Thanks & Regards,
satya.
 

Have you installed powerpc-linux-gcc? If you have installed it, is it in your path?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top