mahmoud_eltahwy
Newbie level 3
tcb8000c
Dear all,
I am working in a project using the TCB8000C LCD controller ..
I connect the LCD to the MCU via Serial port .I followed the initialization sequence in the application notes and I tried to draw a line on it but till now the LCD didn't display any thing.
I tried to read the registers of LCD to check if it works or not and I succeed to read the reset value of the registers correctly..
I don't know why it doesn't display any thing on screen.
The connections between the LCD and MCU are :
TxD , RxD , VCC , Ground
So please if anyone could help me.
Appreciate your help
Thanks
Regards
Mahmoud
Dear all,
I am working in a project using the TCB8000C LCD controller ..
I connect the LCD to the MCU via Serial port .I followed the initialization sequence in the application notes and I tried to draw a line on it but till now the LCD didn't display any thing.
I tried to read the registers of LCD to check if it works or not and I succeed to read the reset value of the registers correctly..
I don't know why it doesn't display any thing on screen.
The connections between the LCD and MCU are :
TxD , RxD , VCC , Ground
So please if anyone could help me.
Appreciate your help
Thanks
Regards
Mahmoud