Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

printing on Rogers 3010 ceramic

Status
Not open for further replies.
J

joskem

Junior Member level 3
Junior Member level 3
Joined
Feb 28, 2010
Messages
30
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,497
I need to print a patch antenna on Rogers RO3010 dielectric.
What is the way of printing on a ceramic material, and is it easy to find a manufacturer who will have the required equipment? Any suggestions for a manufacturer?
 

Rogers is basically supplying copper cladded substrates that can be a processed in a standard PCB process. There are however some special requirements for mechanical treatment, e.g. drilling and milling. Most PCB manufacturers will be able to make Rogers based PCBs.
 

Thank you for your response. Could you please suggest any potential PCB manufacturers? (preferably in Europe)
 

For RO3010 which is teflon-ceramic based, a special process is needed for vias. From my experience, many PCB manufacturer do not support these materials.

This is a PCB manufacturer from Germany who has a lot of experience with all the different Rogers substrates:
**broken link removed**
They also accept small volume/prototyping jobs.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top