POWERPLANES WITH _LAYOUT_

Status
Not open for further replies.
T

TANTALO

Junior Member level 1
Joined
Jul 17, 2001
Messages
17
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
48
I try to make a 4 layers pcb. I assigned VCC and GND in the spreadsheet to inner1 and inner2 layers, and I signed the PLANE option in this.
When It starts route, as with SPECCTRA_ as with internal autorouter, It appairs these nets all traced but not use internal layers.

Whats is wrong? How I must to define internal powerplanes.

Thanks
 

Possible you have 2layer routing specctra or an error to configure layer.
 

Dear

In Specctra autorouter, It don't define a plane layers, so when use specctra, please don't create plane data, after run autoroute and translate to Software, which U use to route, run plane data, everything ok.

Best Regards

Concat
 

Thanks to alls
I solved this problem. In the Layout´s spreadsheet, I must to active the nets options and to select GND and VCC. Then I can select which plane I want for such net.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…