Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Power Line Communication through Distribution Transformers?

emaq

Member level 2
Joined
Sep 17, 2015
Messages
50
Helped
0
Reputation
0
Reaction score
0
Trophy points
6
Activity points
519
Is it possible to have power line communication through several distribution transformer? The transceivers should be connected to 220V low voltage AC outlets with a communication link through a 11kV high-voltage line (delta-connected and without neutral) and through 11k/220V distribution transformers.

Are there any commercial products available to achieve the communication link or any DIY schematic to do this? The primary purpose of this communication is for the protection and fault detection of 11kV distribution network with least possible cost and licensing is not issue.
 

Toggle Sidebar

Part and Inventory Search


Welcome to EDABoard.com

Sponsor

Sponsor

Design Fast


×
Top