pankajpc
Junior Member level 1
How to determine power dissipation from ENOB and speed fs in ADC. Normally, power consumed is given by V*I
However, one can estimate power depending on what kind of adc architecture is used. Typically, in pipeline adc first two stage consume most of the power along with s/h.
Like wise in flash it is comparators which consume power.
Please advise.
regards
luxdove2001
However, one can estimate power depending on what kind of adc architecture is used. Typically, in pipeline adc first two stage consume most of the power along with s/h.
Like wise in flash it is comparators which consume power.
Please advise.
regards
luxdove2001