Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
You need to give more details about the spec your design has to meet (Gain, P1dB,IIP3, efficiency...). Without any spec, it is hard to help you.
The efficiency depends on the class of operation of the PA (quiescent current). But, there is a trade-off between linearity and efficiency.
Before anything else the power consumption of the PA depends by the output power. Always more output power means more DC current consumption.
Second, depends by power class and by the efficiency.
Hi there,
So you want to design a power amplifier with low power consumption?
Here is the good news my friend: we all have the same problem
Mosieur_Oiso
Hi there,
So you want to design a power amplifier with low power consumption?
Here is the good news my friend: we all have the same problem
Mosieur_Oiso
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
