Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Plz help, What can cause frequency shift problem ?

Status
Not open for further replies.
D

dhavalelectron

Junior Member level 1
Joined
Jul 2, 2008
Messages
16
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,283
Location
Bangalore, India, India
Activity points
1,379
shift problem

I have designed RF PA in ADS 2008 version. i made three different design for 1.8425 Ghz frequency. but after making PCB, i have observed shift of 50 MHz in all three designs.
What could cause such problem, is it due to ADS ?
Plz help me, i can't able to locate cause problem.

Regards,
 

do you calculate the Rin and Rout correctly, it seem have problem with the RLC circuit...
other root cause you can try check the SNR and reduce any unwanted noise..
 

did you consider the parasitic of the PCB in your ADS design simulation?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top