Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Please help - PAE calculation

Status
Not open for further replies.
K

katykaty03

Member level 1
Joined
Aug 24, 2004
Messages
32
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,286
Activity points
283
Hi all,
I found a datasheet stated: PLoad(avg)=8W, Gain=14dB, Vds=28V, Vdq=170mA, PAE=40%, WCDMA mode
Would you help me on the calculation how to obtain PAE 40%?
**broken link removed**

thanks!
 

As you know PAE=((Pout-Pin)/Pdc)x100%. Pdc=Vds x I but you don't know "I" ,cause they give you only quiescent current Idq. So from your parameters you can only obtain "I".
I=(Pout-Pin)/(PAEx100xVds)
 
Thank you! It's all because "I" is missing!. so i need to check I-V curve first
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top