please help me to solve the problem

[dingjingfeng]

hfss mesh generation has failed

[error] Mesh generation has failed. Specific details may be found in 3D

Modeler>Model Analysis>Show Analysis Dialog>Last Simulation Mesh. (3:09 24, 2007)

[error] Simulation completed with execution error on server: Local Machine. (3:09 2007)

BEGIN_ERR
10 Volume Mesh Generation Failed
0 1 #nextgen/ver6_stitching_flag failure_mode_enum
END_ERR
BEGIN_ERR
10 Volume Mesh Generation Failed
1 1 #nextgen/ver6_stitching_flag failure_mode_enum
END_ERR



Error in stitch modul.


version HFSS 10.0

 

[kumagai]

volume mesh generation failed hfss

Probably there are meshing problems.
You may remove these problems using Model Analysis.

Select 3D Modeler> Model Analysis

 

[dingjingfeng]

mesh generation has failed

I find when I use the V11,this problem dispared

 

[cd79]

mesh generation has failed hfss

Upload your file, so people can check it.

 

[ali110]

Hi
I think your problem might have two resons: 1. there's no enough space on your disk(when your meshes are so high) 2. when your structure is so big and your mesh isn't suitable for it

 

[Adnaneh]

I agree ; I have been facing this issue on meshing because of the structure was too much big. May be it is a good idea to use some symetry planes that can reduce meshing volume.

 

[dingjingfeng]

I also think my design is too large.

 

[snkhan]

What about uploading ur desing if its not confidential