Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

please help me to solve the problem

Status
Not open for further replies.

dingjingfeng

Full Member level 4
Joined
Aug 12, 2005
Messages
190
Helped
17
Reputation
34
Reaction score
8
Trophy points
1,298
Activity points
2,243
hfss mesh generation has failed

[error] Mesh generation has failed. Specific details may be found in 3D

Modeler>Model Analysis>Show Analysis Dialog>Last Simulation Mesh. (3:09 24, 2007)

[error] Simulation completed with execution error on server: Local Machine. (3:09 2007)

BEGIN_ERR
10 Volume Mesh Generation Failed
0 1 #nextgen/ver6_stitching_flag failure_mode_enum
END_ERR
BEGIN_ERR
10 Volume Mesh Generation Failed
1 1 #nextgen/ver6_stitching_flag failure_mode_enum
END_ERR



Error in stitch modul.


version HFSS 10.0
 

kumagai

Junior Member level 1
Joined
Mar 30, 2007
Messages
16
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,385
volume mesh generation failed hfss

Probably there are meshing problems.
You may remove these problems using Model Analysis.

Select 3D Modeler> Model Analysis
 

dingjingfeng

Full Member level 4
Joined
Aug 12, 2005
Messages
190
Helped
17
Reputation
34
Reaction score
8
Trophy points
1,298
Activity points
2,243
mesh generation has failed

I find when I use the V11,this problem dispared
 

cd79

Member level 4
Joined
Jul 6, 2005
Messages
69
Helped
28
Reputation
58
Reaction score
21
Trophy points
1,288
Location
Germany
Activity points
1,808
mesh generation has failed hfss

Upload your file, so people can check it.
 

ali110

Full Member level 1
Joined
May 2, 2005
Messages
97
Helped
11
Reputation
22
Reaction score
6
Trophy points
1,288
Activity points
1,827
Hi
I think your problem might have two resons: 1. there's no enough space on your disk(when your meshes are so high) 2. when your structure is so big and your mesh isn't suitable for it
 

    dingjingfeng

    points: 2
    Helpful Answer Positive Rating

Adnaneh

Newbie level 1
Joined
Feb 20, 2006
Messages
1
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,281
Activity points
1,284
I agree ; I have been facing this issue on meshing because of the structure was too much big. May be it is a good idea to use some symetry planes that can reduce meshing volume.
 

    dingjingfeng

    points: 2
    Helpful Answer Positive Rating

dingjingfeng

Full Member level 4
Joined
Aug 12, 2005
Messages
190
Helped
17
Reputation
34
Reaction score
8
Trophy points
1,298
Activity points
2,243
I also think my design is too large.
 

snkhan

Full Member level 6
Joined
Oct 19, 2005
Messages
324
Helped
38
Reputation
74
Reaction score
20
Trophy points
1,298
Location
Gods place
Activity points
3,213
What about uploading ur desing if its not confidential
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top