hi, im doing a red light detection system and i need to programme a system for a traffic intersection. i use 4 inductive loops, one for each direction and 4 cameras, one for each direction. i need to take the info from the inductive loop and if the light was red, the plc sends a trigger to the camera
Please clarify if the question is targetting to programmable logic, PLC or microcontroller? Moderators can move the thread to an appropriate forum, if neccessary.
Please clarify if the question is targetting to programmable logic, PLC or microcontroller? Moderators can move the thread to an appropriate forum, if neccessary.
Sounds like an overseeable programming problem. Each intersection entry can be implemented separately without dependencies on the three other directions. Two inputs, one output, possibly a general enable input. Sketch a state diagram.
Sounds like an overseeable programming problem. Each intersection entry can be implemented separately without dependencies on the three other directions. Two inputs, one output, possibly a general enable input. Sketch a state diagram.