Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Plastic enclosure with opening for teminal blocks

Status
Not open for further replies.
J

Jester

Full Member level 6
Full Member level 6
Joined
Aug 18, 2012
Messages
377
Helped
7
Reputation
14
Reaction score
7
Trophy points
1,298
Location
.
Visit site
Activity points
4,754
I'm probably the millionth designer that needs an off the shelf plastic enclosure with a cutout for terminal blocks for their one of project.

Budd Industries has DIN style, however their sort of odd shaped, I'm looking for more of a simple rectangular box with a as cast opening for a terminal block.
https://www.digikey.ca/product-sear...=0&page=1&quantity=0&ptm=0&fid=0&pageSize=500

Any suggestions?

- - - Updated - - -

Something like this, but readily available in USA

https://www.google.ca/url?sa=i&rct=...L1bAb3puVLwRa27XX3yIJDrg&ust=1421501788895645
 

Take a look at this https://www.mcmaster.com/#electrical-enclosures/=vpol2n
It is an box with a terminal board inside. Terminal box.png
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top