Hi,
In my design I need 4 batteries in total and hence I have placed two on one side of the PCB and two on the other side right below the first two.
Because rest of the circuit isn't too big and the batteries are eating up too much space.
But will that cause a problem in any way if the power signal traces are running parallel to each other on the two sides of the board?
Do I need to change the placement or this won't cause any substantial problem?
Hi,
it is not a problem.if same type of voltage battery not a issue.if it is different need to think about it.Let me know what is voltage and current level of your battery
Run the traces for +3V parallel with ground tracks, this creates a parallel plate capacitor which might even reduce noise that's being coupled into the traces externally.