PIC16f877a LCD ready-to-use functions needed

[imranahmed]

Please let me know that I need LCD functions use for PIC16 series or PIC16f877a.

Can anyone give me link,hint or functions?

 

[hemnath]

For different compilers, there are different LCD functions used.
Check your examples folder where you have installed your compiler. And, read LCD.c or lcd.h file in your examples folder.

 

[jayanth.devarayanadurga]

If you use Hi Tech C then you can see the codes at saeedsolutions.blogspot.com

 

[imranahmed]

The LCD functions at saeedsolutions and lcd.h file in compiler cannot run can anyone know what is problem error[1098] occurs.

 

[pasicr]

Hi Ahmed,
read this, if you still dont have decision about compilers try this

very good lib for LCD use...
best regards

 

[imranahmed]

Thank you dear pasicr.

 

[imranahmed]

Dear jayanth,

Please let me know that in saeedsolutions.blogspot.com ,the LCD program I run successfully, but one thing is that, which function shows value store in variable like this ,if unsigned char RPM=234; , then LCD should show 234 instead of its ASCII value.

 

[imranahmed]

Please let me know that if i want to display floating point value on LCD so how to program it,like if voltages are 12.58V.

 

[hemnath]

declare the variable as float.
And if you want display the value 12.58 ,
then, in the printf statement use as, "%4.2f".

Best wishes

 

[imranahmed]

Thank you, but I am not using printf statement ,

GotoYXPositionOnLCD(LCD_LINE1,10);
WriteStringToLCD("VOLTS=");
WriteDigitsToDisplay(ADC_value);

How to do in this?