Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

PIC16F877A interfacing with a nokia 3120

Status
Not open for further replies.
L

lginside

Newbie level 2
Joined
Dec 6, 2009
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Colombo
Activity points
1,290
I need to send AT commands to my nokia 3120 via a pic16F877A. Since the Pic emits only 0 - 5V as outputs, do I have to convert my 5V output signals from the UART to 3.3V? If so can anyone suggest a proper circuit or an IC to implement this 5V <-> 3.3V conversion? Thank You! :D
 

try grounding ur 5v line with 3v3 zener diode.

i made long time back pic based nokia (3310) sim unlocker, and used 3v3zn

br
hobbiest_2k3
 

    L

    lginside

    Points: 2
    Helpful Answer Positive Rating
hobbiest_2k3 said:
try grounding ur 5v line with 3v3 zener diode.

i made long time back pic based nokia (3310) sim unlocker, and used 3v3zn

br
hobbiest_2k3
Click to expand...

Thanks! Will try this. :D
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top