PIC programmer (RS232 or normal serial - usb)

Status
Not open for further replies.
W

wakaka

Full Member level 4
Joined
Dec 7, 2005
Messages
237
Helped
10
Reputation
20
Reaction score
6
Trophy points
1,298
Activity points
2,931
programmer rs232

Hi all, do u guys know any serial or RS232 PIC programmer that is compatible with a usb to serial converter?
I cant find any usb programmer which is avaible for free.
Plz advice on that, thankx....
 

pic programmer rs232

Check out this programmer:

**broken link removed**
**broken link removed**

It has both ports: USB and serial ..

Regards,
IanP
 

i know that, but i would liek to build one. Although it has the schematic, but i dun think its firmware is available.....
 

EasyProg / ProProg by Olin Lathrop :both are listed on **broken link removed** .
You can buy either, or make an EasyProg yourself.
(the schematics & layout are on the website).

Wisp628 by Wouter van Ooijen:
http://www.voti.nl/wisp628/n_index.html
Simpler circuit, you can also either buy or build.

They will work with a USB-serial converter because
they use the serial port in a conventional way, unlike
some simpler programmers (JDM-type, etc...) which
will almost certainly *won't* work with a dongle.

Good luck
Christian
 

I would suggest you build a ICD2 clone then you can program and debug.
Regards,
John.
 

Here is the topic John Dekker referred to:



Polymath
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…