PIC programmer (RS232 or normal serial - usb)

[wakaka]

programmer rs232

Hi all, do u guys know any serial or RS232 PIC programmer that is compatible with a usb to serial converter?
I cant find any usb programmer which is avaible for free.
Plz advice on that, thankx....

 

[IanP]

pic programmer rs232

Check out this programmer:

**broken link removed**
**broken link removed**

It has both ports: USB and serial ..

Regards,
IanP

 

[wakaka]

i know that, but i would liek to build one. Although it has the schematic, but i dun think its firmware is available.....

 

[fenugrec]

EasyProg / ProProg by Olin Lathrop :both are listed on **broken link removed** .
You can buy either, or make an EasyProg yourself.
(the schematics & layout are on the website).

Wisp628 by Wouter van Ooijen:
http://www.voti.nl/wisp628/n_index.html
Simpler circuit, you can also either buy or build.

They will work with a USB-serial converter because
they use the serial port in a conventional way, unlike
some simpler programmers (JDM-type, etc...) which
will almost certainly *won't* work with a dongle.

Good luck
Christian

 

[John Dekker]

I would suggest you build a ICD2 clone then you can program and debug.
Regards,
John.

 

[polymath]

Here is the topic John Dekker referred to:



Polymath