raman00084
Full Member level 6
hi how to use pic kit 2 lite (blueroom electronics schematic)can any one tell me the header connection for pic16f877a ic and also tell me what soft ware shoud i use
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
when you say "how to use" you may please explain in detail what else you expect the kit to work and then ask how to work with it. Usually the Pickit2 or its clones like the "lite" can be used to program any popular PIC chips with 5 volts. For connecting the header, just refer the schematic where it is mentioned on the Firmware Chip pin. Same pins are to be connected at the target side too as 1:1hi how to use pic kit 2 lite (blueroom electronics schematic)can any one tell me the header connection for pic16f877a ic and also tell me what soft ware shoud i use
No the said / discussed circuit is capable of programming only 5volt devices. For making it program 3.3 volt devices, just regulate the Vdd to 3.3 volts with a Resistor zener combination which is discussed in the forum before. Just use search to find it. Cheerscan i use it to programm 3.3v mcu