Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

PIC and USB data transfer

Status
Not open for further replies.

nick703

Advanced Member level 1
Advanced Member level 1
Joined
Oct 17, 2011
Messages
422
Helped
21
Reputation
44
Reaction score
22
Trophy points
1,298
Location
surat
Visit site
Activity points
3,987
hello friends i have choose pic micro controller for my small application like Run 3 motor which controlled By RELAY . so i have a question i have a less pin like 3 motor controlled by 3 pin of pic and 2 pin for USB communication . so is that possible to 8 pin or 10 pin pic MCU ? so which MCU perform this task . So which pic at lest 8 to 10 pin micro controller doing this task please suggest me bro!!!
 

I believe the PICs with fewest number of I/O pins and USB hardware module are as follows:

PIC16F1454 \
PIC16F1455 12
PIC16F1613 /

PIC18F13K50 -15
PIC18F14K50 -15



BigDog
 
ok then what about ATMEL series ?


thanks big dogguru is that any project available to do with this pic to usb communication ? i have mplab and c18 complier or hitec c compiler.
 
Last edited:

Last time I checked the ATMEL ATMega series devices which offer a USB hardware module are all 32, 44, or 64 pin TQFP or VQFN packages.


You may possible be able to use a low pin count DIP package microcontroller, like the ATTiny or PIC12F/PIC16F series combined with a softUSB library like V-USB for ATMEL or 16FUSB for PIC:

V-USB Virtual USB Port for AVR

16FUSB - software implementation of the USB low-speed for PIC16F628/628A


BigDog

- - - Updated - - -

is that any project available to do with this pic to usb communication ? i have mplab and c18 complier or hitec c compiler.

All of the following are available in a 14-pin DIP and compatible with MPLAB IDE and XC8 or possibly the latest version of the HiTech PICC Compiler:

PIC16F1454
PIC16F1455
PIC16F1613

They are only four more pins than the 10-pin packages you have requested.

Of course the following are compatible with MPLAB and the C18 Compiler and are available in a 20-pin DIP:

PIC18F13K50
PIC18F14K50


BigDog

- - - Updated - - -

Another possible option would be to utilize a USB to UART Bridge Chip like FTDI FT232R or Silabs CP210X series.

A PIC12F series low pin count device with a UART in combination with a CP210X would provide USB connectivity.

There are prefab USB to UART cables available which contain a device similar to the FT232R or CP210X which are fairly inexpensive.


BigDog
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top