An encoder is a device, circuit, transducer, software program, algorithm or person that converts information from one format or code to another..
encoding is the process by which information from a source is converted into symbols to be communicated. Decoding is the reverse process, converting these code symbols back into information understandable by a receiver.
i know, what is definition of encoder..there is thousand type of encoder..and you have choose HTXXX
in your project, what is your purpose of encoder..what i mean why you need it?
give the output of metal detector to PIC port pin and scan the port pin for a change in level..... the pin status should change when metal is detected.......
give the output of metal detector to PIC port pin and scan the port pin for a change in level..... the pin status should change when metal is detected.......
if i giv supply (5v) pin11,pin32 also rxvd that volts.
But i hav programmed for Port D. bt am not able to rxv corresponding vltge in that port pins.
It seems the pblm is bcz of MCLR pin?
What connxn to MCLR pin will rctify my problem sir?
---------- Post added at 16:19 ---------- Previous post was at 16:17 ----------
Sir
PIC16F877A MCLR pin--- How the connxn should be sir?
use serial communication program.... as you set baud rate etc.. and transmit through the uart.. its the same program. COMPORT is nothing but serial port...