Oct 11, 2005 #1 G gorkin Advanced Member level 1 Joined Feb 27, 2002 Messages 422 Helped 13 Reputation 26 Reaction score 5 Trophy points 1,298 Location brazil Activity points 3,375 Hi guyes! What the standard drill tools used today? Thanks, Gorkin.
Oct 12, 2005 #2 C cyberblak Full Member level 2 Joined Jul 19, 2005 Messages 138 Helped 6 Reputation 12 Reaction score 0 Trophy points 1,296 Location Canada Activity points 2,618 Hi, I don't know if there's a de facto standard that I don't know about, but I found out that different manufacturers uses different standard drill sizes. You probably should contact your PCB manufacturer... cyberblak
Hi, I don't know if there's a de facto standard that I don't know about, but I found out that different manufacturers uses different standard drill sizes. You probably should contact your PCB manufacturer... cyberblak
Oct 12, 2005 #3 K kot_b Advanced Member level 4 Joined Dec 28, 2001 Messages 103 Helped 5 Reputation 10 Reaction score 3 Trophy points 1,298 Location Latvia Activity points 696 Seems, that for metric drill zise was in step of 0.1(mm).
Oct 20, 2005 #4 ezpcb Banned Joined Mar 2, 2005 Messages 210 Helped 8 Reputation 16 Reaction score 3 Trophy points 1,298 Activity points 0 we use 0.025mm, or 1mil step for holes above 0.2mm. for holes under 0.2mm laser must be applied, step should be continuously mike www.ezpcb.com
we use 0.025mm, or 1mil step for holes above 0.2mm. for holes under 0.2mm laser must be applied, step should be continuously mike www.ezpcb.com
Oct 20, 2005 #5 VVV Advanced Member level 5 Joined Nov 26, 2004 Messages 1,575 Helped 384 Reputation 768 Reaction score 88 Trophy points 1,328 Activity points 19,971 Check this out: www.advancedmsinc.com/guidelines.htm