Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

patch antenna excitation

Status
Not open for further replies.

smnobo

Junior Member level 1
Joined
Nov 13, 2005
Messages
17
Helped
2
Reputation
4
Reaction score
1
Trophy points
1,283
Activity points
1,404
Dear freinds,
my problem is: why the almost microstrip line used as the feed line for the patch antenna are 50 Ohm? i ask you also if we can use other 74 Ohm feed line excitation for this antenna?
thanks for your help....:D
 

Darren_pan

Member level 2
Joined
Dec 21, 2005
Messages
51
Helped
4
Reputation
8
Reaction score
3
Trophy points
1,288
Activity points
1,572
fix antenna excitation

i think you can use 74 Ohm feed line to excite the antenna. Using the 50 Ohm became our custom. lots of equitments support the 50 Ohm...
 

smnobo

Junior Member level 1
Joined
Nov 13, 2005
Messages
17
Helped
2
Reputation
4
Reaction score
1
Trophy points
1,283
Activity points
1,404
thanks, so please can you tell me how we can determine the input impedance for the UWB antenna, so here we have a broad band frequency, and we know that the input impedance is calculated for a single frequecy. i ask you please to explain me this problem & send me if you have some theoretical doc. thank you very much
happy new year for you and for all our freinds on the edaboard forum...
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top