Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Parallel Coupled Strip line filter

Status
Not open for further replies.

danesh

Full Member level 3
Full Member level 3
Joined
Nov 24, 2003
Messages
184
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,296
Activity points
1,343
parallel coupled filter

hi guys,

i wanted to design parallel coupled filter. i having trouble in calculating the width and the saparation between two strip line. Obtained:
Dielectric constant ,er= 2.55
Thickness, H=0.5inch
Even mode impedance=82.53ohm
odd mode impedance =37.6ohm

appreciate your help. thanks
 

Hello danesh,


I have used the following website link for calculating coupled stripline...
http://www.ideaconsulting.com/dstrip.htm

Enter dimensions:
Trace width (W) 90 mils
Trace thickness (T) 1.5 mils
Trace spacing (S) 7.5 mils
Distance between planes (B) 500 mils
Relative Dielectric constant (Er) 2.55

Differential Trace Impedance 82.3 ohms

Also you can use for other Transmissionline calculations a free TXLINE from AWR
http://web.awrcorp.com/Usa/Products/Optional-Products/TX-Line/

By the way AWR Microwave Office has good number of Stripline circuit models which will be useful for quickly designing circuits....


---manju---
 

danesh said:
hi guys,

i wanted to design parallel coupled filter. i having trouble in calculating the width and the saparation between two strip line. Obtained:
Dielectric constant ,er= 2.55
Thickness, H=0.5inch
Even mode impedance=82.53ohm
odd mode impedance =37.6ohm

base on presented value on book microwave filters impedance matching network and coupling structure
the width =0.236 inch
separation 0.021inch
appreciate your help. thanks
 

you can also use ADS
 
  • Like
Reactions: rj45

    rj45

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top