princee
Newbie level 3
- Joined
- Nov 26, 2012
- Messages
- 3
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Activity points
- 1,302
Hi everyone,
I am using 2 sfp+(10G) in my board. For testing it in 10G mode I have connect these two sfp+ port with 2 xfp port on tester side. One port is working fine in terms of tx and rx throughput (i.e. transmit and receive throughput is same) But in other channel(sfp+) iI am getting very low receive throughput (i.e very high packet loss approx 90-95% loss).
Can any one tell me what can be the possible reason behind it??
I have checked it with 4-5 different card. All card have same issue. Some card are working good with channel 0 and channel 1 is faulty and some have correct channel 1 and faulty channel 0. Only one channel is working fine at a time and other is having a high traffic loss.
I have checked schematic and design , every thing is correct.
Please help me finding the possible reason of it.
thanks...
I am using 2 sfp+(10G) in my board. For testing it in 10G mode I have connect these two sfp+ port with 2 xfp port on tester side. One port is working fine in terms of tx and rx throughput (i.e. transmit and receive throughput is same) But in other channel(sfp+) iI am getting very low receive throughput (i.e very high packet loss approx 90-95% loss).
Can any one tell me what can be the possible reason behind it??
I have checked it with 4-5 different card. All card have same issue. Some card are working good with channel 0 and channel 1 is faulty and some have correct channel 1 and faulty channel 0. Only one channel is working fine at a time and other is having a high traffic loss.
I have checked schematic and design , every thing is correct.
Please help me finding the possible reason of it.
thanks...