Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

orcad to allegro ref des renumbering/ merging 2 boards

Status
Not open for further replies.

Johncarlson

Newbie level 1
Joined
Feb 11, 2015
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
7
I am going to be merging 2 boards together, both done in allegro, the schematics are in orcad. my EE's are saying to renumber all of the components on one of the boards to for example r1000 rather than r100 so when they are merged I don't get any error's.
1. how do I do that? can I renumber the ref des in allegro then back annotate into orcad
or do I renumber the schematic to the 1000 numbering scheme and then import physical into the pcb

John
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top