Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

NUMERICAL - CONTROLLED OSCILLATOR

Status
Not open for further replies.

shameem

Member level 5
Joined
Oct 27, 2005
Messages
92
Helped
5
Reputation
10
Reaction score
3
Trophy points
1,288
Activity points
2,042
Hi,
i need a c or matlab code of numerical - controlled oscillator.
If anybody have the code, please send it to me.
 

epp

Full Member level 5
Joined
Mar 4, 2004
Messages
243
Helped
12
Reputation
24
Reaction score
4
Trophy points
1,298
Activity points
1,847
Please, explain to me what kind of oscillator is it and where one can use it.

In Microchip's DSC controllers dsPIC family exists Fast internal oscillator which can be firmware tuned in steps of 1.5% from -12,5% till +10% of base frequency 7.5MHz by writing appropriate values into some register. www.microchip.com
 

shameem

Member level 5
Joined
Oct 27, 2005
Messages
92
Helped
5
Reputation
10
Reaction score
3
Trophy points
1,288
Activity points
2,042
Hi,
Actually i want to implement a digital VCO (i.e. NCO) which should downconvert a complex signal centered at or around 2048 KHZ to the baseband.
 

jishnukkd

Newbie level 4
Joined
Feb 13, 2007
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,301
go to codesearch.google.com
or search in some blogs
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top