obviously non overlap means it should be less than 50% but i am asking is it possible to generate equal pulse width(30% high for F1 and 30% high for F2, or it might be 40% but both should be same) for F1 and F2.
If the duty cycle is not important, then ty this.
Unless I made a mistake, this circuit should produce two signals with 25% duty cycle, but non-overlapped.
Please post if it does not work. I drew it in a hurry, got to go to a Christmas party.
yes, it is possible. The basic circuit consists of 2 NOR gates and a row of inverters for delay. I do not have a picture at hand, look in any book about SC-filters (i.e. the chapter in Davis&Martin).