Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

NI PCI 6533 DIO to NI PCIe 6536

Status
Not open for further replies.

hussain1.bangalore

Member level 2
Member level 2
Joined
Aug 26, 2009
Messages
43
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Location
india
Activity points
1,596
Hi All,

I have NI PCI 6533 DIO PCI card which is very old and now NI is not manufacturing the same card , so it is replaced by NI PCIe 6536 DIO . I am using the PCIe to PCI adaptor as I dont have the PCIe slot.

Now my questions are :-

1) does the same DLL can be used to NI PCIe 6536 DIO ?
2) I am using the LabView 5.1 for NI PCI 6533 DIO is that same can be compatiable for NI PCIe 6536 DIO .

can any one please help me in above questions

Thanks in advance
Hussain .
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top