Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Newbie Question About Circuits

Status
Not open for further replies.

noclue

Newbie level 2
Joined
Jan 23, 2010
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,290
This is probably an incredibly stupid question but oh well. I have a battery, a motor, and a switch. Does it matter whether I put the switch on the red wire or the black wire? TIA
 

If that's all there is in the circuit, it doesn't matter. In a series circuit, the current is the same at all connections so opening any one of them with the switch will stop the current everywhere.

If the motor has a metal body or shaft, it might be connected to one of the motor wires so be careful it doesn't touch anything else.

Brian.
 

Thank you for your help.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top