Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

New Year's Eve LED effect

Status
Not open for further replies.

Vermes

Advanced Member level 4
Joined
Aug 2, 2011
Messages
1,163
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,316
Activity points
22,318


This is a project of a lamp made for the New Year's Eve. Matrix consists of LEDs 3x15 in RGB colours. Processor AT89C4051 was used as a counter. The colour change takes place in the rhythm of the music via built-in microphone from which the signal is passed through a low-pass filter or using a generator with adjustable timing. Additionally, a strobe function was built in (all LEDs light up simultaneously) with an adjustable speed.
The whole device was closed in a housing from a halogen lamp.



Link to original thread (useful attachment) – noworoczny led efekt
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top