Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Need some info about TC35 GSM modem

Status
Not open for further replies.
A

ADGAN

Full Member level 5
Full Member level 5
Joined
Oct 9, 2013
Messages
295
Helped
4
Reputation
8
Reaction score
4
Trophy points
18
Visit site
Activity points
1,837
Hi! If you have used a TC35 GSM modem I need some info such as maximum voltage, current ratings, how you interfaced it to a circuit other than using the DC jack & the serial port. I'm facing some difficulties when interfacing.

I gave about 10V to the 3rd Vcc pin. Now it only shows only a Red light. Could it be burn ? :cry: The shop's website which I purchase it, states that it supports 5-24V. Is it only for the DC jack ?

siemens-sms-gsm-tc35-tc35i-development-board-module-uart-rs232-ttl-at-commands_1_.jpg
 
Last edited:

Are you talking about the TC35 module or TC35 connected through the interface board shown on your photo? For the module, there's a Siemens hardware manual, for the interface board, ask your local vendor respectively the board manufacturer.
 

Thanks for the reply. I'm asking about the interface board.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top