Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[SOLVED] Need recommendation for low frequency signal synthesizer

Status
Not open for further replies.

eigenroot

Junior Member level 3
Joined
Feb 1, 2011
Messages
30
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,557
I need a sine wave signal for my circuit, and frequency is in the 100Hz to 5kHz range. I don't need very high output voltage/power, but the phase noise should be low. I check the frequency synthesizer ICs from the major manufacturers, but their frequency is always too high for me (hundreds of MHz to GHz). Can anyone recommend any IC or implementations? (Although IC is preferred, a bulky instrument may also be okay for now if the price is around hundreds of dollars). Thanks!
 

good old one from Fairchild - still available though is the ML2036 IC. Does DC to 50Khz in 1.5Hz steps, sine output with amplitude control and a nice feature of zero crossing inhibit.

Brian.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top