need real SPICE parameters for Shottky diode

[uladz55]

shottky diode spice model reverse

Need real SPICE parameters for Shottky diode (Al - N type Silicon) .

 

[b.pricope]

Here is what I have for BAT62_03W Si Shottky diode from infineon. I hope it helped.

 

[ynhe]

hi
Which model do you want to get?

 

[uladz55]

Hi,
I need Spice parameters for Al-N-Si Shottky diode.
Any parameters for real process is OK.

BTW, where can I find "BAT62_03W Si Shottky diode" spice parameters?

Best regards

Added after 6 minutes:

Dear b.pricope,

Thanks a lot.
It's very helpful for the begining.

Best regards,

uladz55

 

[b.pricope]

Here you will find the datasheet for BAT62_03W.
https://www.infineon.com/cgi-bin/if...age=/ep/program/typelist.jsp&pageTypeId=17099

 

[ynhe]

Hi,
*****************************************************
.MODEL BAT62s D(IS=120N RS=200 N=1.04 XTI=1.8 EG=.68
+ CJO=.35P M=.14 VJ=.4 FC=.5 BV=40 IBV=5U TT=25P)
* for 27C reverse current simulation use: GMIN=3e-8
* 20.12.1993 SIEMENS PD1 KURTH
*****************************************************

ynhe

 

[jodenma]

now which FAB can do this device "Shottky diode (Al - N type Silicon) "?

 

[uladz55]

Hi, jodenma.

It's just not big FAB with bipolar process, it's not a Foundry.

 

[bingjiang99]

You should mention what kind of schotky diode that you need to use. Most of manufactures put the model on their datasheet. You can get such things from Agilent, pretty accurate.