Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Need open-source or Free RTL-GDSII Flow software

Status
Not open for further replies.
T

Thinkie

Full Member level 3
Joined
May 26, 2005
Messages
177
Helped
18
Reputation
36
Reaction score
4
Trophy points
1,298
Activity points
2,242
Free RTL-GDSII Flow ?

Is the are back-end P&R software that is either open-source or free for back-end design ?

icarus can be used for simulation
gtkwave for viewing waves
limited synthesis can be done with icarus with scripts to convert it to technology libraries

but from a netlist to placed routed gates, is there any open-source or free software that can do that ?
 

Re: Free RTL-GDSII Flow ?

Thinkie said:
Is the are back-end P&R software that is either open-source or free for back-end design ?

icarus can be used for simulation
gtkwave for viewing waves
limited synthesis can be done with icarus with scripts to convert it to technology libraries

but from a netlist to placed routed gates, is there any open-source or free software that can do that ?
Click to expand...

electric vlsi can do place and route, like cadence virtuoso layout.
 

    T

    Thinkie

    Points: 2
    Helpful Answer Positive Rating
Re: Free RTL-GDSII Flow ?

i guess you try with Tanner tools..
 

Re: Free RTL-GDSII Flow ?

See links to free softs broken link removed
 
Last edited by a moderator:

Re: Free RTL-GDSII Flow ?

TimberWolf is an open source place and route tool.

Please read this link.
broken link removed
 
Last edited by a moderator:

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top