Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Need info about using Flip-Dot displays

Status
Not open for further replies.

joeyla

Junior Member level 3
Joined
Mar 3, 2006
Messages
31
Helped
4
Reputation
8
Reaction score
3
Trophy points
1,288
Activity points
1,482
Hi, I'm interested in using a Flip-Dot displays for a project.

From the datasheet I will need 3A at 24V for 1ms (each disc) for the 7x5 model. Can someone point me in the right direction for a controller or recommend a circuit or IC's so I can built my own controller. Eventually I want to control 20 of these electromechanical modules.

Thanks
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top