Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

need help to port NUCLEUS to ARM7

Status
Not open for further replies.

zlt7513

Newbie level 6
Newbie level 6
Joined
Oct 7, 2005
Messages
12
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
1,356
anybody ever port NUCLEUS to ARM7? or know how to port NUCLEUS to ARM7?

Thanks.
 

Start with Board Support Package which supports board which is closest to the one you have, and work from there.
 

Thanks.
But I only have the 68K's ports.:cry:
 

Most part of Nucleus source codes are written by C. What you should do is to modify the just like hardware relation code(another word: BSP) and some kernel raltion codes(timer, interrupt, etc).

BTW: Nucleus has supported the ARM7 a long time ago. You could buy this version. Porting from 68k to arm7 is not an easy job.
 

h**p://www.acceleratedtechnology.com/embedded/cpu_nucleus.php#top
 

There are several Nucleus ports available for ARM7. You might want to check with Accelerated Technology and see if they already have the port you are looking for.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top