Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Need help on T-Resonator - some questions

Status
Not open for further replies.

junction_crosstalk

Junior Member level 2
Joined
Dec 3, 2002
Messages
24
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
223
Need help on T-Resonator

Hi All,

I have a coplanar T-Resonator. It's an open quarter wavelength resonator. I'm using the resonator for substrate characterization. I did 2-port measurement by taking the T arms as port 1 and port 2.
My questions are:
1. How can I extract the quality factor due to the conductor losses and the radiation losses.
2. Do I need to take the T arms into account at resonant frequencies?
3. The characteristic impedane(Zo) is needed to find conductor losses. Is it the Zo of the whole resonator (defined from 2-port measurement) or simply the Zo of the resonating coplanar line (the open stub) ?

thanks in advance
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top