I think i need some help in integrating HT picc compiler with mplab.
I have set up MPLAB for HT PICC but even with compiler supplied sample code for LED.C it does not work and exits as follows:
Executing: C:\HT-PIC\BIN\PICC.EXE -Q -MPLAB -C -16F877 led.c -Oled.obj -Eled.cce -G
Halting build on first failure as requested.
BUILD FAILED
i have tried on both 6.xx and 5.7x version of MPLAB.
I have also tried on its own DOS mode, but it is very difficult to trace any messege there. Only thing which I can read is:
Exit status = 4
what is wrong ?
Is there any solution ?
thanks
PS:
I have read the small tutorial on www.microchipc.com and tried to setup, but the result was not successfull ...
Don’t know exactly what the problem is in your case, but check this link for a great step by step instruction on how to integrate PICC with MPLab and create a project.
A lot of more info on this site as well, especially check the FAQ on PICC, there are some limitations and other stuff that is u need to know of when using it.
i was found this problem befor this time,downl load fss serial number generator from https://astalavista.box.sk word search "HI-TECH C"
and put Serial Number with only 5 digit