supersage
Member level 3
Hi all,
I am simulating a 60GHz straight F antenna by Ansoft HFSS. I use the low-loss Rogers material(loss tangent is 0.0021) as the board material. This F antenna resonates around 61GHz(S11) . However, when I tried to get information on radiation efficiency, it turns out that the radiation efficiency is greater than "1". I don't know what's wrong with my modeling and how to improve it. Could anyone give me some advices? Thank you very much! Welcome to contact me via: hopefully81@gmail.com
Kevin
I am simulating a 60GHz straight F antenna by Ansoft HFSS. I use the low-loss Rogers material(loss tangent is 0.0021) as the board material. This F antenna resonates around 61GHz(S11) . However, when I tried to get information on radiation efficiency, it turns out that the radiation efficiency is greater than "1". I don't know what's wrong with my modeling and how to improve it. Could anyone give me some advices? Thank you very much! Welcome to contact me via: hopefully81@gmail.com
Kevin