Need help in SRAM design - help needed

Status
Not open for further replies.
S

shineqi

Member level 1
Joined
Jan 16, 2007
Messages
36
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,286
Activity points
1,508
Need help in SRAM design

I got a worng function in my sram.

I explain that: first, I stored the data in address A
second, I changed server address and stored serveral other data.
finally, I can not get the correct data in address A.

Any timing sheme mistake can cause this kind of problem ?

Anyone can share the usefule documents about sp sram and dp sram to me?

Thanks so much
 

Need help in SRAM design

it sounds that the decoder may have some problems
 

Need help in SRAM design

It may be if you change address when CS (chip select) still active (usually CS=0).
 

Re: Need help in SRAM design

check your bit line and word line...

first, when you do the writing make both the bit line are compliment of each other.
next select your bit line both high to load the data

in both these cases the word line should be high..

finally in the last stage u will get you data what ever high or low u have taken...in the next pulse.

cheers ahsad
 

    S

    shineqi

    Points: 2
    Helpful Answer Positive Rating
Re: Need help in SRAM design


Thanks, I solved that porblem.

And, I am still doing the dual port sram, any documents may share with me?

BTW, you r in Australia?

I have studied there for a couple of years
 

Re: Need help in SRAM design

no wories mate..
yes i do..
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…