need help how to program mpc89e58af

[nader44]

I have a big problem with mpc98e58af.
the problem:
in front of the receiver starsat 5300usb it there's the mpc89e58af after flacher the receiver mpc89e58af blocks the receptor and no solution for it.
my application is there a solution to program mpc89e58af.
I pre purchase a solution for an aircraft program, but I want to program the megawin mpc89e58af in front of the receiver without the tear. thanks

Added after 2 hours 10 minutes:

help please

Added after 4 hours 24 minutes:

pleaaaaaaaaaaaaaaaaaaaaaaaaase

 

[nader44]

hellllllllllllllllllllllllllppppppppppppp

 

[bepobalote]

It is a bit difficult to help you...
It is ABSOLUTELY not clear what you want: please rewrite your requirement in a such way that it is understandable!!!

 

[nader44]

I want a tool to program the megawin mpc89e58af

 

[bepobalote]

I want a tool to program the megawin mpc89e58af

You can find such programmer on the megawin website...
http://www.megawin.com.tw/megawin_EN/D_DownloadShow.asp?ID=9
otherwise you can use the following programmer:
http://www.megawin.com.tw/megawin_EN/D_DownloadShow.asp?ID=26

If you really need only a programmer, why did you wrote about a (I think) satellite receiver? Don't you think your request was a bit anomalous?

[Added some minutes later...]
here there are some other programmers which support your chip:
http://www.dataman.com/webpages/productview.aspx?pid=629
http://www.dataman.com/webpages/productview.aspx?pid=627
http://www.dataman.com/webpages/productview.aspx?pid=4
http://www.dataman.com/webpages/productview.aspx?pid=719
http://www.elnec.com/products/device-programmers/beehive4plus-multiprogramming/
http://www.microware-tech.com/winburn.html
http://www.elnec.com/products/device-programmers/beehive8plus-stand-alone/
http://www.elnec.com/products/device-programmers/beeprogplus/

see also:
http://www.keil.com/dd/chip/3925.htm

[some other minutes later...]
I think it was not so difficult to make a search on internet to discover:
http://www.sat-universe.com/showthread.php?p=552605
It seems you have not to program this micro...

 

[nader44]

thank you, but I'm looking on the net but I have not found a solution, the problem is with the megawine mpc89e58af which is the circuit of the display starsat.
14/09/2009 before all is well, then there was a new app that destroyed the receiver (of course not original), the receiver hangs on one without communication it starts to walk he must change memory wane receiver with soft home without being able to decrypt the encrypted channels,
a solution that came from China has been sending
program the facade with a special device which update the facade or mpc98e58af, but this device is well protected in that there is a meter and it will be demolished after 999 update, and this device can program the front of starsat 5300super (ali C), and problem remains with starsat 5300usb (ali E), if you want more explanation I t'envois the picture. Thank you for your help

 

[bepobalote]

I can understand that English is not your mothertongue (like me), but it is REALLY difficult to understand what you are writing!!!!

then there was a new app that destroyed the receiver (of course not original) ...

You do not explain what kind of "app" destroyed the receiver (what you mean for destroyed?).
What was working and not what it is wrong?
Have you asked to the person who developed the "destroying" application?
What you mean for "facade"? What is "the front" of starsat 5300?
Do you think that sending me a picture will help to understand what you are meaning?

If you want to get (maybe) some help, please try to write in a better English and give MORE details.
Please try to reread what you have wrote in the previous posts: you'll find that it is almost impossible to understand it!!!

 

[abid03]

hi all
MPC89E58A datasheet

 

[abid03]

file bin read with beeprog+

 

[abid03]

some files downloaded from net but no tested

NOTE

8051 txd p3.1 = pin11
8051 rxd p3.0 = pin10

89E58 txd p3.1 = pin7
89E58 rxd p3.0 = pin5

 

[nader44]

thanks

 

[mgatesoglu]

I also checked the megawin device on Xeltek device search tool, and it can be pretty much programmed on all SuperPro programmers:

[url]https://www.xeltek.com/device...prog_type=1000&manufacturer=MEGAWIN&company=0 [/url]

The question should be, what is your budget?

 

[laidkerman]

How to programe megawin mpc89e58af hox to program the receiver front

Withgour desoldering the microcontroler

 

[sof940]

please need configuration for TOP2007 USB PROGRAMMER to program MPC89E58AF
reguards

 

[Microcontroller Source]

You can find such programmer on the megawin website...
http://www.megawin.com.tw/megawin_EN/D_DownloadShow.asp?ID=9
otherwise you can use the following programmer:
http://www.megawin.com.tw/megawin_EN/D_DownloadShow.asp?ID=26

If you really need only a programmer, why did you wrote about a (I think) satellite receiver? Don't you think your request was a bit anomalous?

[Added some minutes later...]
here there are some other programmers which support your chip:
http://www.dataman.com/webpages/productview.aspx?pid=629
http://www.dataman.com/webpages/productview.aspx?pid=627
http://www.dataman.com/webpages/productview.aspx?pid=4
http://www.dataman.com/webpages/productview.aspx?pid=719
http://www.elnec.com/products/device-programmers/beehive4plus-multiprogramming/
http://www.microware-tech.com/winburn.html
http://www.elnec.com/products/device-programmers/beehive8plus-stand-alone/
http://www.elnec.com/products/device-programmers/beeprogplus/

see also:
http://www.keil.com/dd/chip/3925.htm

[some other minutes later...]
I think it was not so difficult to make a search on internet to discover:
http://www.sat-universe.com/showthread.php?p=552605
It seems you have not to program this micro...

- - - Updated - - -

You can find such programmer on the megawin website...
http://www.megawin.com.tw/megawin_EN/D_DownloadShow.asp?ID=9
otherwise you can use the following programmer:
http://www.megawin.com.tw/megawin_EN/D_DownloadShow.asp?ID=26

If you really need only a programmer, why did you wrote about a (I think) satellite receiver? Don't you think your request was a bit anomalous?

[Added some minutes later...]
here there are some other programmers which support your chip:
http://www.dataman.com/webpages/productview.aspx?pid=629
http://www.dataman.com/webpages/productview.aspx?pid=627
http://www.dataman.com/webpages/productview.aspx?pid=4
http://www.dataman.com/webpages/productview.aspx?pid=719
http://www.elnec.com/products/device-programmers/beehive4plus-multiprogramming/
http://www.microware-tech.com/winburn.html
http://www.elnec.com/products/device-programmers/beehive8plus-stand-alone/
http://www.elnec.com/products/device-programmers/beeprogplus/

see also:
http://www.keil.com/dd/chip/3925.htm

[some other minutes later...]
I think it was not so difficult to make a search on internet to discover:
http://www.sat-universe.com/showthread.php?p=552605
It seems you have not to program this micro...

Most of the people who use MPC89E58AF is for the satellite receiver, this MCU is frequently be used in the receiver. But one issue is Megawin programmer is only could be use to install softward in MCU but could not "read" the software from the ICS. I know one supplier from China who can supply you with software, hardware service, have professional engineer from England who has over twenty years experience of hardware and software research & developing, already successed in designing and manufacture many products, like high power ultrasonic products. They are agent of Megawin, STC MCU,also can supply with full-scale service including software guidance, components source and PCBA manufacture. you can check the below link **broken link removed**

 

[stc&megawin]

:sad: I could not open the link, it seems that they changed the website link. I am busy with the developing of the Fixed Wireless Terminal, I find it is good to use STC or Megawin MCU, who could supply with this chips? **broken link removed** is the supplier??

- - - Updated - - -



Most of the people who use MPC89E58AF is for the satellite receiver, this MCU is frequently be used in the receiver. But one issue is Megawin programmer is only could be use to install softward in MCU but could not "read" the software from the ICS. I know one supplier from China who can supply you with software, hardware service, have professional engineer from England who has over twenty years experience of hardware and software research & developing, already successed in designing and manufacture many products, like high power ultrasonic products. They are agent of Megawin, STC MCU,also can supply with full-scale service including software guidance, components source and PCBA manufacture. you can check the below link **broken link removed**