Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

N Node GPRS Data Transmission to Server

Status
Not open for further replies.
S

Sanath Embedded

Member level 3
Joined
Jan 23, 2009
Messages
57
Helped
4
Reputation
8
Reaction score
3
Trophy points
1,288
Activity points
1,676
gprs data transmission

Hi Guys,

I want to have the N nodes (say 1000 Nodes) GPRS Data Transmission to Server using TCP/FTP protocol almost at the same time with very small intervals. So can anyone help me how I can synchronize this GPRS data transmission with both Node end as well as Server end.
 

Synchronize required on the Data Transmission on the GPRS Hardware

SIM300 (Node) ------> FTP Server
 

have u found solution for above issue?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top