[MOVED] Through hole soldering recommandation

Status
Not open for further replies.

Haithem

Newbie level 4
Joined
Mar 13, 2012
Messages
7
Helped
3
Reputation
6
Reaction score
3
Trophy points
1,283
Activity points
1,396
Hi,

I need your Help to understand how to make the footprint symbol for this connector with the given data provided by the fabricant ( see attachment )

I can not understand the "RECOMMENDED PCB LAYOUT" informtion, exactly the drill diameter for pins connectors circled in red on the attached image.
that's the final diameter of the drill or with the metal hole of pad?

https://www.molex.com/customer.html?supplierPN=47155-4001



Cdlt,
Haithem.
 

Re: Through hole soldering recommandation

The dimension given (0.74mm) is the finished hole diameter. Your pad will be a lot larger than that.

Keith
 

The dimension on your picture is the recommended (finished) drill hole for the pins. The copper pads must be bigger, according to your annular ring demands.

Example:

drill hole is 0.75mm
minimum annular ring is 0.2 mm.

Pad size = 0.75 + (2x0.2) = 1.15 mm
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…