[Moved] simulation issue in hfss.13

[ranjan08568]

hi frnds

i am using HFSS.13 (64 bit).
i have win 7 profes.in my desktop. Processor is intel core i7. my system having 1 TB hard disk and 16 GB RAM.
when i simulate it takes too long time and RAM used is only 3.5-4 GB.'NOT RESPONDING' has been a common message and it hangs after that.
suggest me to solve the issue.

 

[BradtheRad]

I have not used HFSS but I have some experience in finding ways to keep a simulator from hanging up.

The timestep is important. A reasonable length to try is 1/1000 to 1/100 times the length of whatever cycle your circuit might have going on.

Add resistors across switching components, or components which turn on and off. Add a resistor to ground where you think a component is creating problems.

Convergence problems tend to crop up when you place coils/ diodes/ capacitors neighboring each other. Add resistors across diodes.

Some problems are solved by putting a resistor in series in the same wire with a capacitor.

Some simulators require that your circuit have a ground icon somewhere.

Split a complicated circuit into sections, and simulate them individually. Join two sections together when you see each working okay separately.

Large populations of transistors /mosfets become a burden on the simulator algorithm. If you are using several as switches, replace them with a simple switch operated by a single wire. (I use Falstad's simulator, and this non-real component is called an 'analog switch'.)