Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[moved] please suggest how to avoid grounding in below circuit

Status
Not open for further replies.
M

Maloth Ramesh

Junior Member level 2
Joined
May 31, 2015
Messages
20
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
170
it is showing error while simulating the circuit at "c2 and c4 " capacitors
but it should be non-grounding at these points how to correct the circuit Capture.PNG
 

"Showing" what kind of errors? Please quote error message.

Not directly related to this point, bit V1 and V4 gate control voltage must be definitely referred to the source of the respective transistor rather than ground.
 
FvM said:
"Showing" what kind of errors? Please quote error message.

Not directly related to this point, bit V1 and V4 gate control voltage must be definitely referred to the source of the respective transistor rather than ground.
Click to expand...

ERROR -- Node N01317 is floating
ERROR -- Node N15376 is floating
ERROR -- Node N13934 is floating
 

I didn't notice this before, but the circuit misses a DC path. Can be easily overcome by adding high ohmic dummy resistors.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top