Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[Moved] PCI protocol tutorial

Status
Not open for further replies.
P

praveenpnp

Newbie level 1
Joined
Jul 15, 2014
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
8
hi,

I just want to learn the how the PCI communication is happening between master and slave. I know the process of I2C and SPI protocols but i cant able to understand PCI.


can any one explain in detail about the initialisation of PCI between master and slave.

means which write command is sent by master first and which command sent by slave as reply. there are different commands as C/BE# is configured. how to configure C/BE#

Or can any one atleast send a tutorial which explains PCI from basic level.

thanks in advance.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top