Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[MOVED]Automatic gate control using car horn as operator.

Status
Not open for further replies.

Ayolee

Newbie level 2
Joined
Jun 25, 2011
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,296
please i need help in my project " automatic gate control using car horn as operator". am finding it a little bit difficult, please i am in need of the a complete project for reference and also o complete circuit to accomplish the project. Thanks.
 

srizbf

Advanced Member level 5
Joined
Apr 3, 2010
Messages
1,995
Helped
417
Reputation
840
Reaction score
328
Trophy points
1,363
Activity points
10,985
Re: Automatic gate control using car horn as operator.

it may be difficult to get complete detail for the project.

repost this in 'hardware &pcb design' forum.
 
  • Like
Reactions: Ayolee

    Ayolee

    Points: 2
    Helpful Answer Positive Rating

andre_teprom

Super Moderator
Staff member
Joined
Nov 7, 2006
Messages
9,237
Helped
1,151
Reputation
2,321
Reaction score
1,127
Trophy points
1,403
Location
Brazil
Activity points
53,768
I think he aims to couple the RF garage door controller to the car buzzer.
It is usefull to allow driver to keep hands close to steering wheel.

I had noticed some kind of that product here at local automotive market.
However, the original purpose is not to connect at car buzzer, but at car headlight.

+++
 

cameo_2007

Advanced Member level 3
Joined
Mar 15, 2007
Messages
752
Helped
70
Reputation
142
Reaction score
44
Trophy points
1,308
Location
12°58' N77°38'E
Activity points
5,046
At first, have you thought of how to re-build your gate mechanisms from the existing manually opened set up. Some kind of sliding mechanisms with a motor drive etc. It would be better to work on that first and you have a motorised gate with manual control. It wont be difficult to convert that system into a remote opening mechanism with car horn or anything else.

Regards
 

Ayolee

Newbie level 2
Joined
Jun 25, 2011
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,296
At first, have you thought of how to re-build your gate mechanisms from the existing manually opened set up. Some kind of sliding mechanisms with a motor drive etc. It would be better to work on that first and you have a motorised gate with manual control. It wont be difficult to convert that system into a remote opening mechanism with car horn or anything else.

Regards

actually have gotten some basics but i still need more reference to boost it up, pls which site can u direct me to so mas to get this project so that i can use it as reference. pls help mi . thanks.
 

cameo_2007

Advanced Member level 3
Joined
Mar 15, 2007
Messages
752
Helped
70
Reputation
142
Reaction score
44
Trophy points
1,308
Location
12°58' N77°38'E
Activity points
5,046
you are going in the wrong direction. The technology indeed is so advanced that people depend on the internet for evry other thing.

Comin to the topic, here think, do you really need the help of a site to start up. Its just about putting some stuffs together. What is that more info you need?? a specific question will be of great help.

have you done with these:- you need to control the gate. what do you need? you need some mechanisms which convert electrical energy to mechanical? What is it? A motor? if so how do you set that up. A gear? a belt? A chain? just work around those first. take some time to think. the project being electronics related, you should have studied about the basics. use those skills, and limit the dependency of a site.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top