motorola MC9S12DP256 CLK & POWER SECTION

[mohd_ind00]

motorola clk

HI All,

I am carriying design with microcontroller MC9S12DP256. There are some issues with CLOCK and Power section. Can anybody post the reference design for this Microcontroller.

I am using Crystal oscillator, whethere to connect XTAL to GND or left unconnected in this case.

Thanks,
Imran.

 

[mohd_ind00]

Hi All,

With reference to the above, in data sheet it has given that XCLKS pin to pull down for external oscillator but in the PLL section it given reverse pl clarify, and if possible post reference design.

regards