Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Depends upon what load do you have to pull. If the gates are simple glass doors than you can use some light motor. Even The motor used for the car wind screen can work. But if the gate is much heavy than you might have to go to AC motors.
Kindly describe some specifications of your gates. Weight? Rolling or veritcal lift everything
In principle it is depends on the load that you want to drive.....Meaning torque and Power requirement....the application like automatic gates requires high initial torque to overcome the friction and get the movement-um so .....all it depend on the weight of your gate, kind of roller mechanism used, effective friction with the gate roller and ground .....In my view you need to have this information before deciding the type of motor.....As in earlier post habibparacha said AC and DC motor both will be option based on your requirement
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
